Mobility Works
Sales: 1-877-275-4907
Service:
1-877-275-4912
Rentals:
1-877-275-4915
Vehicles Lifts & Eqpt Service Specials On Sale Rentals About Us Locations Contact
Cross Browser Drop Down Menu by Vista-Buttons.com v5.0.0
Adapt Solutions Wheelchair Ramps Assistant

Power Pull For Wheelchair Ramps

Retractable Cable for Extra Help with Getting Inside Your Van

 

 

Adapt Solution's POWER PULL technology is a wheelchair & passenger ramp assist system. With the use of an electronically controlled retractable cable and remote control, the person in the chair can attach their wheelchair to the POWER PULL from outside the vehicle. The cable is attached to the left and right side of the front of the wheelchair. Once they are positioned on the bottom of the wheelchair ramp, with the push of a button the cable begins to slowly pull them into the vehicle. The cable can be stopped at any time if the person feels they need to re-straighten the wheelchair before continuing.

Great for wheelchair drivers who use hand controls and just need a little assistance with getting up the ramp, the person in the chair simply presses the release button and unhooks the two-position cable from the wheelchair once they are safely inside. The system can also be used to help with existing the vehicle.

POWER PULL Basic Functions

  • Roll up beside your vehicle
  • Take hold of the POWER PULL strap
  • Position yourself in front of the ramp
  • Place the hooks on the left and right side of the chair
  • Press and hold the 'IN' button
  • POWER PULL takes you up the ramp
  • Stop the POWER PULL while on the ramp at any time

POWER PULL Auto-Lock Clutch System

The POWER PULL cable uses an auto-locking clutch system that keeps tension on the cable at all times during use. This means that the cable will never accidentally unravel or become tangled. There is also a safety switch in the design that keeps the POWER PULL cable from accidentally releasing while it is in use. In addition to the remote control stopping capabilities, if the wheelchair is not going up the ramp straight, a built-in breaker prevents the chair from being pulled too far over to one side. The system resets itself in a few seconds, allowing the user to reposition in the middle of the ramp before proceeding.

Power Pull Ramp Assistant
The POWER PULL strap and cable system easily attaches to the front of the wheelchair and pulls the person in the chair up the ramp and into the wheelchair van.

Power Pull Remote Control Power Pull Retractable Cable
The POWER PULL remote control is small enough to fit inside your pocket and easy to use. The retractable cable system doesn't take up much room inside the van.

E-Mail This Page